stainless Steel Z-10005 Waterjet Pump Parts Intensifier Check Valve Body

z-10005 Water jert cutting parts water jet intensifier check valve body Waterjet Pump Parts

z-10005 Water jert cutting parts water jet intensifier check valve body Waterjet Pump Parts descriptions:

The importance of check valves:

In order to prevent the backflow of water, when high-pressure water enters the check valve from the waterjet high-pressure cylinder, the check valve will allow the high-pressure water to enter the check valve inlet. When the pressure of the high-pressure cylinder decreases, the check valve inlet is automatically closed. Prevent backflow of high-pressure water. In order to completely isolate the contact of high-pressure water, many sealing parts are used.

A check valve needs to be set in the following situations:

1. Only on the introduction pipe connected directly from the urban water supply pipe.

2. A check valve should be installed on the water inlet pipe of a closed water heater or water equipment. Since the volume of hot water units used in residential buildings is small, the possibility of backflow is small when there is no hot water circulation. Therefore, there is no hot water unit with a water storage volume of not greater than 200L for hot water circulation in the house, and no check is required. valve.

3. When the water tank and water tower have one inlet and outlet pipes, in order to prevent water from entering at the bottom, check valves should be installed on the water outlet pipe section at the bottom. It should be noted that when this check valve enters the water tank (tower), the pressure of the check valve is unstable due to the action of the three-way jet, which will cause the disc (core) to vibrate. Therefore, the check valve should be subjected to vibration isolation treatment .

z-10005 Water jert cutting parts water jet intensifier check valve body Waterjet Pump Parts:

Company profile:

SHANDONG WAMIT CNC TECHNOLOGY CO.LTD is the professional manufacturer of water jet cutting machine and spare parts for all Chinese brand water jet cutting machine . our factory is located in JINAN city, SHANDONG province, China.We have 420Mpa intensifier pump, 600Mpa intensifier pump ,direct drive pump and 420mpa with dual intensifier pump, we also can provide 3 axis , 5 axis with 10 degree and dynamic 5 axis with 60 degree cutting head water jet cutting machine, pure water cutting and abrasive sand cutting. our machines are with excellent quality - efficient and accuracy, economical investment with low initial cost and low maintenance cost to our customers. All the machinery delivered by us come with first class after-sale service. All machines are with one-year warranty of main parts, whole-life after-service for the entire machine.We can supply water jet cutting machine according to your requests,from the cutting table size to the special design . Especially our new design of automatic abrasive sand removing system bring convenience for glass and marble factories. this system can fit for any brand water jet cutting machine. you needn't stop the machine while it is working.Our new FLOW type cutting head can improve you 10% cutting efficiency, and our new technology can make the machine moving speed to30-50m/min so that reduce you 15%-50% cutting cost according to the materials.Until now We have expanded our market to North America, Australia, Southeast Asia, Central Asia and the Middle East. And establish a good relationship with our customers in Russia, Argentina, America, Canada, UK, Chile, South Africa, Ecuador,Kuwait, Hungary ,Saudi Arabia , Vietnam, Turkey,Mexico,Malaysia ,Australia and other countries and regions.